| 168/2013/EU | Regulation (EU) No 168/2013 of the European Parliament and of the Council of 15 January 2013 on the approval and market surveillance of two- or three-wheel vehicles and quadricycles | D | NA- | 2013-03-15 | -- | |
| 2000/2/EC | Commission Directive 2000/2/EC of 14 January 2000 adapting to technical progress Council Directive 75/322/EEC relating to the suppression of radio interference produced by spark-ignition engines fitted to wheeled agricultural or forestry tractors and Council Directive 74/150/EEC relating to the type-approval of wheeled agricultural or forestry tractors | D | NA- | 2000-01-14 | -- | |
| 2001/3/EC | Commission Directive 2001/3/EC of 8 January 2001 adapting to technical progress Council Directive 74/150/EEC relating to the type-approval of wheeled agricultural or forestry tractors and Council Directive 75/322/EEC relating to the suppression of radio interference produced by spark-ignition engines fitted to wheeled agricultural or forestry tractors | D | NA- | 2001-01-08 | -- | |
| 2009/64/EC | Directive 2009/64/EC of the European Parliament and of the Council of 13 July 2009 on the suppression of radio interference produced by agricultural or forestry tractors (electromagnetic compatibility) | D | NA- | 2009-07-13 | -- | |
| BMW GS 95002-1 | Electromagnetic Compatibility (EMC) General requirements and tests | M | NA- | 2014-10-01 | Supersedes GS 95002-1:2013-07 | |
| BMW GS 95002-2 | Electromagnetic Compatibility (EMC) Requirements and tests on components | M | NA | 2021-05-01 | Supersedes GS 95002-2:2019-10 and GS 95002-3:2015-12 | |
| BMW GS 95002-3 | Electromagnetic Compatibility (EMC) Requirements and tests on components above 60 V nominal voltage | M | NA- | 2015-12-01 | With GS 95002-1, GS 95002-2, GS 95002-4, GS 95002-5 and GS 95002-6 as replacement for GS 95025-1:2012-05 | |
| BMW GS 95002-4 | Electromagnetic Compatibility (EMC) Requirements and tests total vehicle | M | NA- | 2013-07-01 | With GS 95002-1 and GS 95002-2 replacement for GS 95002: 2010-06 | |
| BMW GS 95002-5 | Electromagnetic compatibility (EMC) Requirements and tests within the frequency range 9 kHz to 30 MHz | M | NA | 2015-03-01 | Replacement for GS 95002-5:2013-09 | |
| Chrysler CS-11979 | Electrical and Electromagnetic Compatibility (EMC) requirements for electronic components and subassemblies for Chrysler Group vehicles | M | 2010-04 | 2010-04-13 | -- | |
| CISPR 12 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers | B | Sixth edition | 2007-05-01 | -- | CISPR 12: A1
|
| CISPR 25 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers | B | Fourth edition | 2016-10-01 | This fourth edition cancels and replaces the third edition published in 2008 | CISPR 25:COR1
|
| CISPR 25 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers | B | Edition 5.0 | 2021-12-01 | -- | |
| CISPR 36 | Electric and hybrid electric road vehicles –Radio disturbance characteristics –Limits and methods of measurement for the protection of off-board receivers below 30 MHz | B | Edition 1.0 | 2020-07-01 | -- | CISPR36:A1
|
| DAF BSL 0006-100 | Electrical requirements for electrical/electronic components/systems which are applied in DAF vehicles. | M | Issue 04 | 2015-06-01 | -- | |
| EN 15194 | Cycles - Electrically power assisted cycles - EPAC Bicycles | P | NA- | 2017-10-01 | -- | EN 15194/A1
|
| Fiat 9.90110 | General Specifications for automotive electric and electronic devices (E/E) for Fiat Group vehicles. | M | Issue 13 | 2007-03-23 | Supersedes Fiat 9.90110 Issue 12 | |
| Fiat 9.90111/01 | Electrical and Electromagnetic Compatibility (EMC) requirements for electronic components and sub-assemblies which contain electrical or electronic components for Chrysler/Fiat vehicles. | M | Edition 1 | 2010-05-27 | -- | |
| Fiat FCA CS.00054 | Fiat Chrysler Automobiles. General electrical and EMC performance requirements for E/E components. | M | Initial release | 2015-01-22 | This Specification supersedes FCA Italy 9.90111/01 and FCA US CS-11979 Standards | |
| Fiat FCA CS.00054 | Fiat Chrysler Automobiles. General electrical and EMC performance requirements for E/E components. | M | Change level A | 2018-01-16 | -- | |
| Fiat FPT FPI.TMC004 | Fiat Industries - Fiat Powertrain Technologies EMC standard, valid for devices installed on vehicles with a 12 V or a 24 V electric system equipped with internal combustion engines with "DIESEL" or "OTTO" cycles. The standard consists of the following parts:
- FPI.TMC004/2: Resistance of electronic devices to electrostatic discharges.
- FPI.TMC004/4: Measure of radiated emissions in semi-anechoic chamber by electronic devices installed on a bench.
- FPI.TMC004/7: Measure of emissions conducted on supply lines generated by electric, electronic and electromechanical devices. | M | 1 | 2013-08-01 | -- | |
| Ford FMC1278 | Electromagnetic Compatibility (EMC) requirements for electrical / electronic components and subsystems for Ford Motor Company (FMC). | M | 3rd revision | 2018-12-01 | -- | |
| GM GMW3097 (2015) | General Specification for Electrical/Electronic Components and Subsystems, Electromagnetic Compatibility | M | Rev. 9 | 2015-06-01 | Supersedes GM GMW3097 (2012) rev. 8 | |
| GM GMW3097 (2019) | General Specification for Electrical/Electronic Components and Subsystems, Electromagnetic Compatibility | M | Rev. 10 | 2019-03-01 | Supersedes GM GMW3097 (2015) rev. 9 | |
| GM GMW3097 (2022) | General Specification for Electrical/Electronic Components and Subsystems, Electromagnetic Compatibility | M | Rev. 11 | 2022-12-01 | Supersedes GM GMW3097 (2019) rev. 10 | |
| GM GMW3097 (2024) | General Specification for Electrical/Electronic Components and Subsystems, Electromagnetic Compatibility | M | -- | 2024-02-01 | -- | |
| Hyundai ES 96200-00 | Electromagnetic compatibility specification for Hyundai and Kia vehicles | M | G | 2008-07-03 | -- | |
| ISO 10605 | Road vehicles - Test methods for electrical disturbances from electrostatic discharge | B | Second edition | 2008-07-15 | -- | ISO 10605/A1
ISO 10605/COR.1
|
| ISO 10605 | Road vehicles - Test methods for electrical disturbances from electrostatic discharge | B | Third edition | 2023-06-01 | -- | |
| ISO 11451-1 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology | B | Fourth edition | 2015-06-01 | Supersedes ISO 11451-1:2005 + A1:2008 | |
| ISO 11451-2 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Off-vehicle radiation sources | B | Fourth edition | 2015-08-01 | Supersedes ISO 11451-2:2005 | |
| ISO 11451-3 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: On-board transmitter simulation | B | Third edition | 2015-06-01 | Supersedes ISO 11451-3:2007 | |
 ISO 11451-3 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: On-board transmitter simulation | B | Edition 4 | 2024-06-01 | -- | |
| ISO 11451-4 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Bulk current injection (BCI) | B | Third edition | 2013-04-01 | Supersedes ISO 11451-4:2006 (second edition) | |
| ISO 11451-4 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Bulk current injection (BCI) | B | Fourth edition | 2022-05-01 | Supersedes ISO 11451-4 (2013) | |
| ISO 11452-1 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology | B | Fourth edition | 2015-06-01 | Supersedes ISO 11452-1:2005 + A1:2008 | |
| ISO 11452-10 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 10: Immunity to conducted disturbances in the extended audio frequency range | B | First edition | 2009-04-15 | -- | |
| ISO 11452-11 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 11: Reverberation chamber | B | First edition | 2010-09-01 | -- | |
| ISO 11452-2 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure | B | Third edition | 2019-01-01 | This third edition cancels and replaces the second edition (ISO 11452-2:2004) | |
| ISO 11452-3 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: On-board transmitter simulation | B | Thirth edition | 2016-09-01 | This third edition cancels and replaces the second edition (ISO 11452-3:2001) | |
| ISO 11452-3 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: On-board transmitter simulation | B | Fourth edition | 2024-06-03 | -- | |
| ISO 11452-4 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods | B | Fourth edition | 2011-12-15 | -- | |
| ISO 11452-4 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Bulk current injection (BCI) | B | Fifth edition | 2020-04-01 | Supersedes ISO 11452-4:2011 | |
| ISO 11452-5 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 5: Stripline | B | Second edition | 2002-04-15 | Supersedes ISO 11452-5:1996 (first edition) | |
| ISO 11452-6 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 6: Parallel plate antenna | B | First edition | 1997-12-15 | -- | ISO 11452-6/C1
|
| ISO 11452-7 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7: Direct radio frequency (RF) power injection | B | Second edition | 2003-11-15 | -- | ISO 11452-7/A1
|
| ISO 11452-8 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields | B | Second edition | 2015-06-01 | Supersedes ISO 11452-8:2007 | |
| ISO 11452-9 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9: Portable transmitters | B | Second edition | 2021-10-01 | Supersedes ISO 11452-9 (2012) | |
| ISO 11452-9 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9: Portable transmitters | B | First edition | 2012-05-01 | -- | |
| ISO 13766-1 | Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 1: General EMC requirements under typical electromagnetic environmental conditions | P | First edition | 2018-04-01 | -- | |
| ISO 13766-2 | Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 2: Additional EMC requirements for functional safety | P | First edition | 2018-04-01 | -- | |
| ISO 16750-1 | Road vehicles - Environmental conditions and testing for electricaland electronic equipment - Part 1: General | B | Third edition | 2018-11-01 | -- | |
| ISO 16750-1 | Road vehicles - Environmental conditions and testing for electricaland electronic equipment - Part 1: General | B | Fourth edition | 2023-07-01 | -- | |
| ISO 16750-2 | Road vehicles -Environmental conditions and testing for electricaland electronic equipment -Part 2: Electrical loads | B | Fourth edition | 2012-11-01 | -- | |
| ISO 16750-2 | Road vehicles -Environmental conditions and testing for electricaland electronic equipment -Part 2: Electrical loads | B | Fifth edition | 2023-07-01 | -- | |
| ISO 16750-4 | Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 4: Climatic loads | B | Third edition | 2010-04-15 | -- | |
| ISO 16750-4 | Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 4: Climatic loads | B | Fourth edition | 2023-07-01 | -- | |
| ISO 21848 | Road vehicles - Electrical and electronic equipment for a supply voltage of 42 V - Electrical loads | B | First edition | 2005-04-15 | -- | |
| ISO 7637-1 | Road vehicles - electrical disturbances from conducting and coupling Part 1: Definitions and general considerations | B | Third edition | 2015-10-01 | Supersedes ISO 7637-1:2002 | |
| ISO 7637-1 | Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Vocabulary and general considerations | B | Fourth edition | 2023-12-01 | Supersedes ISO 7637-1:2015 | |
| ISO 7637-2 | Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only | B | Third edition | 2011-03-01 | Supersedes ISO 7637-2 (2004) second edition | |
| ISO 7637-3 | Road vehicles -- Electrical disturbances from conduction and coupling -- Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines | B | Third edition | 2016-07-01 | Supersedes ISO 7637-3 (2007) second edition | |
| JLR-EMC-CS v1.0 incl. Amendment 4 | Electromagnetic Compatibility (EMC) requirements for electrical/electronic (E/E) components and subsystems for Jaguar and Land Rover (JLR) vehicles. | M | 1.0 | 2015-02-25 | Supersedes EMC-CS-2010JLR v1.2 | |
| John Deere JDQ 202 | Testing of Electronic and Electrical Devices — Electrical Transient and Steady-State Loads | M | NA- | 2015-03-17 | -- | |
| John Deere JDQ 203 | Testing of Electronic and Electrical Devices — Electromagnetic Compatibility | M | NA- | 2013-12-17 | -- | |
| John Deere JDQ 53.3 | Environmental Design & Testing of Electronic/Electrical Components and Assemblies for John Deere equipment. | M | 2005-10 | 2005-10-11 | -- | |
| MAN M 3285 (2008) | Electromagnetic compatibility (EMC) in MAN commercial vehicles | M | 2008-07 | 2008-07-01 | Supersedes M 3285 2001-01 | |
| Mazda MES PW 67602A | Electromagnetic Compatibility (EMC) of electronic and electric components used for Mazda vehicles. | M | 2011 | -- | Supersedes Mazda MES PW 67602 | |
| Mercedes MBN 10284-2 | EMC Requirements – Component Tests (Passenger Car and Vans) | M | NA- | 2019-10-01 | Supersedes MBN 10284-2 (2015-07) | |
| Mercedes MBN 10284-4 | EMC Performance Requirements – Component Tests (Commercial Vehicles and Buses) | M | 2017-07 | 2017-07-01 | Supersedes: MBN 10284-4 (2011-04) | |
| Mercedes MBN 50284-2 | EMC Requirements – Component Tests | M | NA- | 2023-02-01 | Supersedes MBN 10284-2. Transition period: 0 months | |
| Mitsubishi ES-X82010 | General specification of environment tests on automotive electronic equipment for Mitsubishi vehicles | M | O | 2001-12-12 | -- | |
| PSA B21 7110 | Requirements for electric resistance and the electromagnetic compatibility (EMC) for electrical and electronic equipments, for Peugeot - Citroën (PSA) vehicles. | M | F | 2019-04-01 | Supersedes B21 7110 Issue E | |
| Regulation 10 (Rev. 6) | Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility | R | Rev. 6 | 2019-11-20 | Supersedes Regulation 10 Rev. 5. Transition period till 1 September 2022. For the vehicle type which are not equipped with a coupling system to charge the REESS, or for component or separate technical unit which doesn’t include a coupling part to charge the REESS the previous Revision will still be accepted by the contracting parties, see section 13.2 Transitional provisions. | Regulation 10 (Rev. 6) Amend 1
Regulation 10 (Rev. 6) Amend 2
|
| Regulation 100 (Rev. 2) | Electric power trained vehicles. Concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles and the conditions for reciprocal recognition of approvals granted on the basis of these prescriptions | R | NA- | 2013-08-12 | Supersedes Regulation 100 Rev. 1 including amendments. | Regulation 100 (Rev. 2) / Amend. 1
Regulation 100 (Rev. 2) / Amend. 2
Regulation 100 (Rev. 2) / Amend. 3
Regulation 100 (Rev. 2) / Amend. 4
Regulation 100 (Rev. 2) / Amend. 5
|
| Regulation 100 (Rev. 3) | Concerning the Adoption of Harmonized Technical United Nations
Regulations for Wheeled Vehicles, Equipment and Parts which can be
Fitted and/or be Used on Wheeled Vehicles and the Conditions for
Reciprocal Recognition of Approvals Granted on the Basis of these
United Nations Regulations | R | NA- | 2022-03-23 | Supersedes Regulation 100 Rev. 2 including amendments. | Regulation 100 (Rev. 3) / Amend. 1
Regulation 100 (Rev. 3) / Amend. 2
|
| Regulation 116 (Rev. 2 Add.115) | Uniform technical prescriptions concerning the protection of motor vehicles against unauthorized use. | R | Rev. 2 Add. 115 | 2005-04-18 | -- | Regulation 116 Rev. 2 Add.115 Amend. 1
Regulation 116 Rev. 2 Add.115 Amend. 10
Regulation 116 Rev. 2 Add.115 Amend. 2
Regulation 116 Rev. 2 Add.115 Amend. 2 Corr. 1
Regulation 116 Rev. 2 Add.115 Amend. 3
Regulation 116 Rev. 2 Add.115 Amend. 4
Regulation 116 Rev. 2 Add.115 Amend. 5
Regulation 116 Rev. 2 Add.115 Amend. 6
Regulation 116 Rev. 2 Add.115 Amend. 7
Regulation 116 Rev. 2 Add.115 Amend. 8
Regulation 116 Rev. 2 Add.115 Amend. 9
Regulation 116 Rev. 2 Add.115 Corr. 1
Regulation 116 Rev. 2 Add.115 Corr. 2
Regulation 116 Rev. 2 Add.115 Corr. 3
|
| Regulation 97 (Rev. 1) | Uniform provisions concerning the approval of vehicle alarm systems (VAS) and of motor vehicles with regard to their alarm systems (AS) | R | Rev. 1 | 2007-01-29 | -- | Regulation 97 (Rev. 1) Amend. 1
Regulation 97 (Rev. 1) Amend. 2
Regulation 97 (Rev. 1) Amend. 3
Regulation 97 (Rev. 1) Amend. 4
Regulation 97 (Rev. 1) Amend. 5
|
| Renault 36-00-808--N | RESISTANCE TO ELECTRICAL DISTURBANCESAND ELECTROMAGNETIC COMPATIBILITYINSTRUCTIONS CONCERNINGELECTRICAL, ELECTRONIC AND PYROTECHNICEQUIPMENT | M | N | 2016-03-01 | -- | |
| Volvo 31850329 | EMC System and Component Requirements - Electromagnetic Compatibility Specification | M | Rev. 004 | 2014-06-16 | Engineering specification with EMC requirements, test methods and test procedures for components used by Volvo Car Group (VCC). | |
| Volvo STD 515-0003 | Electro-magnetic compatibility, EMC | M | Issue 6 | 2023-05-01 | Supersedes Volvo STD 515-0003 Issue 5 | |
| VW TL 81000 | Electromagnetic Compatibility of Electronic Components for Motor Vehicles | M | 2018-03 | 2018-03-01 | Supersedes TL standards 81000:2016-02 | |
| VW TL 81000 | Electromagnetic Compatibility of Electronic Components for Motor Vehicles | M | 2021-09 | 2021-09-01 | Supersedes TL standards 81000:2016-02, 2021-06 | |
